adkfatimah's Profile on Ping.sg PCHblog PCHblog: TipTrickKomputer


YUMI – Multiboot USB Creator


tak perlu panjang lebar....aku nak kongsi satu software ni...bagi  siapa yang dah biasa format komputer guna pendrive tu....rasanya dah tak ada masalah....bagi yang tak tahu lagi boleh rujuk sini


untuk buat pendrive special ni...kita bole guna YUMI – Multiboot USB Creator...
software ni senang nak guna....tak mcm software lain yg memang rumit....
lagi pulak software ni

Antivirus Paling Sesuai Untuk Komputer Lama Seperti Pentium 3


requirements

  • Processor Pentium 3, 128 MB RAM, 100 MB of free hard disk space
  • Microsoft Windows 2000, Microsoft Windows XP/Vista/7 (32/64 bit)
  • DOWNLOAD

Kod Beep Komputer

Standard Original IBM POST Error Codes
Code Description

1 short beep System is OK
2 short beeps POST Error - error code shown on screen No beep Power supply or system board problem Continuous beep Power supply, system board, or keyboard problem Repeating short beeps Power supply or system board problem
1 long, 1 short beep System board problem
1 long, 2 short beeps Display adapter problem (MDA, CGA)
1 long, 3 short beeps Display adapter problem (EGA)
3 long beeps 3270 keyboard card
IBM POST Diagnostic Code Descriptions
Code Description
100 - 199 System Board
200 - 299 Memory
300 - 399 Keyboard
400 - 499 Monochrome Display
500 - 599 Colour/Graphics Display
600 - 699 Floppy-disk drive and/or Adapter
700 - 799 Math Coprocessor
900 - 999 Parallel Printer Port
1000 - 1099 Alternate Printer Adapter
1100 - 1299 Asynchronous Communication Device, Adapter, or Port
1300 - 1399 Game Port
1400 - 1499 Colour/Graphics Printer
1500 - 1599 Synchronous Communication Device, Adapter, or Port
1700 - 1799 Hard Drive and/or Adapter
1800 - 1899 Expansion Unit (XT)
2000 - 2199 Bisynchronous Communication Adapter
2400 - 2599 EGA system-board Video (MCA)
3000 - 3199 LAN Adapter
4800 - 4999 Internal Modem
7000 - 7099 Phoenix BIOS Chips
7300 - 7399 3.5" Disk Drive
8900 - 8999 MIDI Adapter
11200 - 11299 SCSI Adapter
21000 - 21099 SCSI Fixed Disk and Controller
21500 - 21599 SCSI CD-ROM System

AMI BIOS Beep Codes
Code Description

1 Short Beep System OK
2 Short Beeps Parity error in the first 64 KB of memory
3 Short Beeps Memory failure in the first 64 KB
4 Short Beeps Memory failure in the first 64 KB Operational of memory
or Timer 1 on the motherboard is not functioning
5 Short Beeps The CPU on the motherboard generated an error
6 Short Beeps The keyboard controller may be bad. The BIOS cannot switch to protected mode
7 Short Beeps The CPU generated an exception interrupt
8 Short Beeps The system video adapter is either missing, or its memory is faulty
9 Short Beeps The ROM checksum value does not match the value encoded in the BIOS
10 Short Beeps The shutdown register for CMOS RAM failed
11 Short Beeps The external cache is faulty
1 Long, 3 Short Beeps Memory Problems
1 Long, 8 Short Beeps Video Card Problems

Phoenix BIOS Beep Codes
Note - Phoenix BIOS emits three sets of beeps, separated by a brief pause.

Code Description
1-1-3 CMOS read/write failure
1-1-4 ROM BIOS checksum error
1-2-1 Programmable interval timer failure
1-2-2 DMA initialisation failure
1-2-3 DMA page register read/write failure
1-3-1 RAM refresh verification failure
1-3-3 First 64k RAM chip or data line failure
1-3-4 First 64k RAM odd/even logic failure
1-4-1 Address line failure first 64k RAM
1-4-2 Parity failure first 64k RAM
2-_-_ Faulty Memory
3-1-_ Faulty Motherboard
3-2-4 Keyboard controller Test failure
3-3-4 Screen initialisation failure
3-4-1 Screen retrace test failure
3-4-2 Search for video ROM in progress
4-2-1 Timer tick interrupt in progress or failure
4-2-2 Shutdown test in progress or failure
4-2-3 Gate A20 failure
4-2-4 Unexpected interrupt in protected mode
4-3-1 RAM test in progress or failure>ffffh
4-3-2 Faulty Motherboard
4-3-3 Interval timer channel 2 test or failure
4-3-4 Time of Day clock test failure
4-4-1 Serial port test or failure
4-4-2 Parallel port test or failure
4-4-3 Math coprocessor test or failure
Low 1-1-2 System Board select failure
Low 1-1-3 Extended CMOS RAM failure

masalah gelembung udara dalam external tank printer


cara atasai masalah gelembung udara dalam external tank printer




bila printer tak guna dalam 4 ke 5 hari...printer memng jadi masalah..ink dalam tiub kosong atau ada gelembong ada angin...ni cara nak bagi ok balik

apa yg di perlukan adalah picagari dan alat special refill jenis a,b atau c.
ikut jenis printer.



ni la gamba alat tu...1 getah warna merah dan satu lagi getah dia warna hijau.
yang merah utk catrigde hitam dan hijau utk catrigde color.



seterusnya pasang catridge pada alat ni macam kat bawah...gambar ni aku guna catrigde yang tak pakai ex-tank...so bagi yang pakai ex-tank catridge korang sudah tentu bersambung ngan tiub getah ex-tank.



last sekali ..ambik picagari sedut ink dari bawah alat ni...macam dalam gambar
so korang akan nampak ink di sedut masuk dalam picagari dan ink dalam tiub ex-tank pon dah bergerak dan gelembong udara pon hilaang....siap...




| iNFORMASI TERKiNI |

About

Box Office

Powered by Blogger.